This is a guide to how to make Sans fight scenes. This will be a long post. I even took screenshots.
 

The Sans Posing

Alright, nothing left and right. First, you'll need a model to represent Sans. I recommend the Sans Playermodel. It might be "pipann", but you will need the Sans powers addon (. I use it with no music, but that doesn’t make any difference. You are downloading it for models, not attacks.) The pipann Sans models allow you to modify bodygroups as well as other things. If you don’t know where to insert a rug doll, just go into addons and locate the Sans one. Simply click on Sans. After loading it in, you will see the Sans-ragdoll.
 
 

 
 
(The following paragraph is for pipann Sans users. Skip this paragraph if your pipann Sans model is not being used.)
 
Now you want to pose it. I'm fairly certain you know how to use the PhysGun and the E key. You can then modify your body groups. Hold the C Key and right-click Sans. Then, you can go to bodygroups. You'll be able to see the eyes and shoes, hands, as well as face options such as a wound. Here are some examples showing what your sans model could look.
 
 

 
 
You should use the Sans Model.
 
 
 

Gaster Blasters (Skip)

I don't want to confuse you guys so I put this before your bones. Insert the Gaster Blaster model from Sans Powers. Here's how it looks.
 
 

 
 
Next, repeat the process with Sans (. If you used pipann it will only take 2 sections.) except this is "Edit Bones". These lines might look similar to bones on the Gaster Blaster. 1 for each jaw.
 
 

 
 
Now, if your mouth is open, you'll see an arrow that points either up or lower. (Up can be used for opening.) If you want the camera to shoot, you can use the rope tool from your mouth to point it at the target. Use the XBeam and increase the width. The maximum is 10, and you can add 10 more… I don’t remember.
 
 

 
 
Gaster Blasters is over.
 
 
 

The Bones

Now, insert the bone.
 
 

 
 
This bone model can not be edited. I did however create some presets to make it blue. (I am new to using screenshots in my guides, so please excuse the lack of caption.)
 
 

 
 

 
 
There. There are the bones. You can edit the bones by turning them and changing their position.
 
We aren't done yet. I brought in a Bonus.
 
(I have a brain!
 
 

 
 
The bone cages.
 
You will need 5 bones (or any other amount) to join them and weld the pieces together.
 
 

 
 
You will then copy it and place it in front of your original. Then, join them and copy them. Then, place them on each of the 2 bones. Weld them all together. Congratulations! Now you know the basics of a Sans Fight Scene. I hope you take something from this!
 
Here's one final screenshot, an image I created using this information.
 
 

 
 
Here we come to an end for the The Basics Of A Sans Undertale Fight Scene! – Garry’s Mod guide. I hope this guide has helped you with your gameplay. If you have something to add to this guide or believe we forgot some information to add, please let us know via comment! We check each comment manually by approving them!